The survey crew is done! Let the grading begin!

Putting it together. 

Getting the track plan onto the benchwork was a bit of a process. I designed the layout using CADRAIL. It took several sheets of 8 1/2" X 11" paper and a few rolls of tape to put the full scale track plan together. When all the bits of paper became whole, I secured it to the layout using push pins. I marked the center of the tracks and building corners using 3/4" 18 gauge wire brads nailed into the plywood. It reminded me of the movie Hell Raiser Pinhead character looking at all the wire brads sticking out of the 1/2" plywood and taped up paper. The push pins and drawing were carefully removed. I left the brads in as survey markers. Using a pencil, I made lines in between the brads for the track centers and building outlines. I pulled all my survey markers out and was getting excited to see the layout in its rawest form. Track centers done! Now, how am I going to duplicate the roadbed that I saw on a fellow modeler's layout? The modeler I'm talking about is Steven Malley's Buffalo Line. To see it in action follow this link: https://www.youtube.com/watch?v=z3sxMeqhRm0

 Steven explained  that he uses 1/4" clear pine lattice material from Home Depot. I started looking at the material, he was right it was going to be expensive! Did I give up on the Idea? No, I was very impressed with how well his layout runs. I'm not using the exact material he is using, but I have a carpenter friend that hooked me up with something that will work. Next Post, I'll explain the roadbed I'm using.    

EMD SW1 Cornwall Railroad 16 sitting outside the machine shop September 24, 1958.

The Prototype Location:

General Location of the Cornwall RR. The pin labeled Cornwall Railroad Shops is where my layout starts. The pin labeled Cornwall Ore Banks Ore bins is the general location of the Cornwall Mines and where the layout ends. 

I thought I'd give you a general location on the area I'm modeling. If you're not from around the area, you've probably never heard of the Cornwall Railroad. There are a couple of websites http://www.cornwallrailroad.com/ and http://home.dejazzd.com/jmattern/home.htm. Visit them if you would like more info. 

The Model Plan and Construction: 
The pin I have up there on the map above, labeled Cornwall Railroad Shops, is my current focus of my layout. I'm modeling the shops the way they looked during the 1950s. Here is the track plan for the Cornwall Railroad shop area. Based on this track plan, I'd say that the photographer would have been standing by the store house when they took the photo of Cornwall 16. I've also added some benchwork construction photos. 

The module is constructed in sections that are bolted together with 1/4" bolts.

First section. The Machine Shop building will be located in this section. 

4 Sections fitted together before bolts were added. 

The completed workbench frame. Constructed of 3/4" plywood ripped to 3 1/2" width.
This room is a temporary location for the layout.

Cornwall 122 hauling "R&C Coal" for interchange at Mount Hope, Pa.

The photo above shows a Cornwall Railroad locomotive from 1961. It shows a model I built in 2004. I plan on posting information on my modeling efforts in 1:87 scale (HO) on the Cornwall Railroad. 

The Cornwall Railroad was a Pennsylvania short line that ran from Lebanon to Mount Hope. It interchanged with the Reading and Pennsylvania Railroads. It's main purpose was to haul raw iron ore from the mines in Cornwall to Lebanon where it was processed. The refined ore was shipped to Bethlehem Steel Furnaces. The Cornwall Railroad operated from 1850 until 1964.  

Here are some photos of my Cornwall Railroad 122 model:

Under Construction

Fresh Out of the Paint Shop

Here is what is under the Hood

122 on the former Stiegel Valley Model Railroad Club.

Back side

Close Up of rear

Actual Prototype

Trying to re-create Prototype shot on Nick Kulp's Cornwall Layout